Engineered for high plasticity clays, shale, and Moroccan red marl with maximized energy efficiency.
Meeting Morocco's booming construction demands across Casablanca, Tangier, Rabat, Marrakech, and Agadir.
The Kingdom of Morocco is experiencing an unprecedented surge in civil infrastructure, commercial urban development, and residential housing projects. Driven by national initiatives such as the "Villes Sans Bidonvilles" (Cities Without Slums) program, major port developments around Tangier Med and Nador West Med, and massive preparations for the 2030 FIFA World Cup, the demand for high-strength, thermally insulating terracotta red bricks has reached historical highs.
In modern Moroccan masonry construction, the staple building unit remains the hollow clay brick—locally designated as Brique Creuse (including 6-hole, 8-hole, and 12-hole configurations) alongside Hourdis for ceiling beam slabs and solid decorative facing bricks (Briques Pleines). Traditional, low-yield Hoffman kilns and manual brick molds can no longer keep pace with Moroccan strict construction codes (NM 10.1.042) and energy efficiency standards (RTCM - Règlement Thermique de Construction au Maroc). Modern industrial red brick machinery is imperative for Moroccan brickmakers seeking to lower fuel consumption and maximize extrusion output.
Morocco's Ministry of National Territory Planning, Land Planning, Housing and City Policy is targeting millions of square meters of green, thermally insulated builds by 2030, necessitating high precision extruded hollow blocks.
Rising energy prices in North Africa have made fuel-efficient tunnel kilns and automated setting robots the standard investment choice for sustainable Moroccan briqueteries (brick factories).
Moroccan clay deposits—found in Berrechid, Meknès, Fès, and the Gharb basin—often feature moderate plasticity with quartz inclusions. Our heavy-duty roller crushers and double-shaft mixers ensure ultra-fine homogenizing down to
Equipped with American/European grade vacuum pumps delivering up to -0.098 MPa, our extruders eliminate internal air pockets, boosting green brick compressive strength to resist handling damage prior to drying.
Instantly switch tooling to manufacture standard Moroccan Brique 8 Trous (20x20x7cm), Brique 12 Trous (20x20x15cm), Hourdis for reinforced concrete floor slabs, and split decorative terracotta tiles with a single machine line.
Comprehensive technical metrics designed for medium to large capacity industrial briqueteries.
| Equipment Model / Line Stage | Production Capacity (Standard Moroccan Units) | Power Rating (kW) | Extrusion Pressure / Vacuum Degree | Optimal Local Application in Morocco |
|---|---|---|---|---|
| VP-Series High Vacuum Extruder 60/60 | 15,000 – 25,000 pcs/hour (Brique 8 trous) | 160 + 200 kW | 3.5 – 4.5 MPa / -0.098 MPa | Primary line for high-density hollow blocks & hourdis in Casablanca/Settat. |
| Dual Shaft Soil & Silt Mixer SJ-3500 | 40 – 60 m³/hour continuous feed | 55 × 2 kW | Twin shaft synchronized forced blending | Pre-blending alluvial clay, shale, and industrial additives for moisture control. |
| High-Speed Servo Cutter & Slicer | Up to 32 cuts/minute (Synchronized) | 4.5 kW Servo-driven | Precision tolerance ±0.5mm | Burr-free slicing of green hollow brick columns with automatic wire cleaning. |
| Robotic Brick Stacking & Setting Machine | 20,000 – 40,000 bricks/hour | 35 kW System Integrated | Multi-axis servo gripper clamp | Direct stacking onto kiln cars for rapid chamber drying or natural air sheds. |
| Automatic Strapping & Bundling Station | 50 – 80 pallet packs/hour | 15 kW Hydropneumatic | Dual-band PET/Steel wrapping | Secure packaging for long-distance transport to rural Moroccan build sites. |
Fuel and thermal energy represent up to 45% of production costs in Moroccan brickyards. Our advanced internal and external combustion tunnel kilns are engineered to run flexibly on natural gas, heavy fuel oil (Mazout), liquefied petroleum gas (LPG), or pulverized petroleum coke (petcoke).
By incorporating an intelligent waste-heat recycling network, hot air expelled from the tunnel kiln's cooling zone is directly channeled into the rapid dryer chamber. This closed-loop thermal recovery lowers net fuel consumption by up to 35% compared to traditional Hoffman setups, enabling Moroccan investors to achieve full capital payback within 24 to 36 months.
Bricks manufactured with Henan Cadier machinery routinely exceed Moroccan Standard NM 10.1.042 for compressive load capacity (average > 5.0 MPa for hollow blocks; > 15.0 MPa for pavers and solid blocks).
Furthermore, the exceptional structural uniformity guaranteed by our hard-plastic vacuum extrusion process ensures superior acoustic insulation and thermal barrier properties, matching the energy preservation demands of Morocco's coastal humid zones as well as continental arid interior territories.
We Henan Cadier Green Building Technology Co.,Ltd are dedicated to the overall solution of large-scale production line of new energy-saving and environmentally friendly wall materials and the integration of high-end building resources since 2009.
Our company covers an area of 41,000 square meters, including 15,600 square meters for production workshops and 4,000 square meters for office, R&D centers and supporting buildings. It currently has multiple engineers and more than 60 mid-to-senior technical personnel.
We supply all the high end equipment related with bricks and tile production, such as:
As of today, we have obtained more than 100 patents for brick kiln. We continuously enhance our technical capabilities to strive to provide customers with efficient and high-output automated brick factories across Morocco and North Africa.
From initial geological soil analysis to kiln firing and local operator training in Morocco.
Ensuring customers' peace of mind through a comprehensive service ecosystem, certified North African logistics, and advanced raw material testing capabilities.
Our company provides one-stop service, ensuring customers' peace of mind. Our company is equipped with a complete set of raw material testing and inspection equipment, as well as remote services. We provide comprehensive technical support to customers from factory design, brick machine equipment selection, brick plant construction, to the later operation of the brick plant.
Explore our full lineup of heavy-duty preparation, vacuum extruding, automated slicing, stacking, and bundling systems.