China Vertical Shaft Impact Hammer Crusher - Leading Suppliers & Factory for Sand Making Machines
When the motor runs, it drives the central shaft; four lines of hammers are fixed on the central shaft, each line with four pieces of hammers. Materials are fed from top of the crusher; they are crushed by the high speed rotation hammers. There are liners around the crusher body to protect the crusher from damage. The materials are threw to the crushing cavity and impacted by the high rotating hammers and discharged out under the role of gravity, and the finial materials are sent from bottom of the crusher.
It is mainly used for all kinds of ores, cement, refractories, bauxite clinker, glass raw materials such as hard, hard materials, finely and the compression strength of the materials to be crushed should not exceed 140MPa and the humidity should not be higher than 15%. In the mechanism of building sand, stone and a variety of metallurgical slag is widely used in crushing, high production efficiency compared with other types of crusher.
- 1This machine has a large crushing ratio, with a maximum crushing ratio that can be adjusted arbitrarily to the desired discharge particle size, unaffected by the wear of hammers and liners.
- 2Without screen bars, it is less prone to clogging when processing materials with high moisture content and high clay content.
- 3An elastic adjustment mechanism is adopted, allowing uncrushable materials to be automatically discharged, preventing equipment damage.
- 4Bearings are horizontally arranged, ensuring a long service life and enabling crushing of high-temperature materials (such as cement clinker).
- 5The rotor structure is unique; when crushing materials, the rotor body experiences minimal wear.
- 6The rear cavity is equipped with a screw or hydraulic opening mechanism, allowing easy replacement of wearing parts without lifting the main unit.