China Suppliers Tunnel Kiln for Internal Firing of Coal Clay Bricks - Reliable Factory Solution
Equipment Introduction
Typically the cross section width is 2.5m, 3.6m, 4.8m, 6.9m, 9m. The top generally adopts masonry type suspended roof with refractory bricks and splicing type hanging structure with aluminum silicate fiber modules. The length of kiln cart is matched according to the product.
A tunnel kiln typically consists of the following main parts:
- Kiln Body: The main structural part of the tunnel kiln, usually an elongated passage with tracks or rollers inside to support and move the green bricks.
- Preheating Zone: The first zone that the green bricks enter after entering the kiln body, where the temperature gradually increases to remove moisture from the bricks.
- Firing Zone: The core area of the tunnel kiln, with the highest temperature, where the bricks are sintered.
- Cooling Zone: The zone where the fired bricks are cooled down gradually to a temperature suitable for unloading.
- Combustion System: Provides the heat required for firing, usually including burners, fuel supply systems, and exhaust systems.
- Ventilation System: Controls the airflow inside the kiln to ensure complete combustion and uniform temperature distribution.
- Drive System: Used to move the green bricks through the kiln, usually including motors, chain drives, or roller drive devices.
- The working principle of a tunnel kiln is based on a continuous production mode.
- Green bricks are placed on kiln cars, which enter the kiln body via tracks or rollers.
- The green bricks are gradually heated in the preheating zone to remove excess moisture, and the exhaust gases from the kiln can be recirculated to improve thermal efficiency.
- The green bricks reach the highest temperature in the firing zone and complete the sintering process.
- The fired bricks are gradually cooled in the cooling zone to a temperature suitable for unloading.
- Kiln cars move continuously through the kiln, with new green bricks entering and fired bricks being unloaded, achieving continuous production.
To ensure the efficient operation and long service life of tunnel kilns, regular maintenance and care are necessary:
- Regularly inspect the kiln body for cracks, deformations, or other damage, and repair them in a timely manner.
- Clean the combustion system regularly, including burners and fuel supply systems, to ensure complete combustion.
- Ensure that the ventilation ducts are unobstructed and check the normal operation of fans.
- Inspect the operation of the drive system, including motors, chains, or roller drives, and lubricate and replace worn parts in a timely manner.
- Regularly calibrate temperature sensors and control systems to ensure accurate temperature control.
Tunnel kilns are widely used in the following fields:
1
Ceramics Industry
For firing ceramic products such as tiles and sanitary ware.
2
Brick & Tile Industry
For firing clay bricks, cement bricks, etc.
3
Glass Industry
For firing and annealing glass products.
4
Refractory Materials Industry
For firing refractory bricks and other refractory materials.
Q
What are the standard cross-section widths available for internal firing assembly tunnel kilns?
The standard cross-section widths typically available are 2.5m, 3.6m, 4.8m, 6.9m, and 9m. The length of the kiln cart is customized and matched according to the specific product requirements.
Q
What are the three main thermal zones inside a tunnel kiln?
A tunnel kiln is divided into three main thermal zones: the Preheating Zone, where moisture is gradually removed from green bricks; the Firing Zone, which is the highest-temperature core area where sintering occurs; and the Cooling Zone, where fired bricks are gradually cooled to a safe unloading temperature.
Q
How does a tunnel kiln achieve continuous production?
Tunnel kilns achieve continuous production by placing green bricks on kiln cars that move continuously through the kiln via tracks or rollers. As new green bricks enter from one end, fired bricks are simultaneously unloaded from the other end, allowing for an uninterrupted production cycle.
Q
What industries commonly use tunnel kilns?
Tunnel kilns are widely used across several industries, including the ceramics industry (tiles, sanitary ware), the brick and tile industry (clay bricks, cement bricks), the glass industry (firing and annealing), and the refractory materials industry (refractory bricks and related products).
Q
How often should tunnel kiln maintenance be performed?
Regular maintenance is essential for efficient operation. This includes periodic inspection of the kiln body for cracks or deformations, routine cleaning of the combustion system and burners, checking ventilation duct flow and fan operation, lubricating and replacing worn drive system components, and calibrating temperature sensors and control systems to maintain accurate temperature management.
Q
What type of roof structure is used in tunnel kilns?
Tunnel kilns generally adopt a masonry type suspended roof constructed with refractory bricks, or a splicing type hanging structure utilizing aluminum silicate fiber modules. The choice of roof structure depends on the specific thermal and structural requirements of the kiln application.